Best Bicycle Brake Cable Cutter

Cable 6 Dec 2022 10+ Comments Open

1. Unknown Cable End Crimps

Unknown Cable End Crimps

It is easy to adjust tension with one hand. The Bicycle Cable Crimping Terminal is made of high quality aluminum and has an effective protective function. Their products have good flexibility and Luster. Quality Consistency andDurability. Light and portable, easy to install, can help you raise efficiency. O-Rings are easy to install. It's suitable for all kinds of bikes, Mountain Bikes, Road Bikes, Folding Bikes, Bring these accessories, enjoy your bike tour. 48pcs Cable Crimp Terminals are black, gold, blue, purple, green, orange, white, and red. You will also get 6 sets of O-Rings, which are made of high-quality rubber, soft and not fragile, which can protect your frame from scratches, which can meet your needs. The Universal Cable End Pressure Line is used for the end of the Brake Wire Core and the end of the Speed Change Wire Core. It can prevent the core of the wire from unraveling after cutting.

Brand: Hzjd Bike Tool

👤These seem to be made of aluminum. I used the same diagonal cutters that I used to cut the line to size. I messed up the first one. It doesn't take much more to secure it.

👤My supply was in another city. I had to order a lot of duplicate equipment. The price was made up in speed because these folks ship fast.

👤It was fun to install. It is a bit much for the price, but people who like to tinker with their bike will notice and say something.

👤They went on the cable and were easy to crimp with regular needle nose pliers. There were no complaints.

👤It works perfectly after a bike cable change. It's cool to color match, but it's a small detail to change the color. I'm going to swap them out on my other bikes.

👤I bought it when I changed out my train. They work well. I have some left for other bikes, but now I can upgrade my bike with these.

👤What I was looking for. The crimping process was easy as always. They look great. A pair of pliers is all you need to secure them on. 10/10

👤It's the only reason I bought them.

2. Hyacinth Premium Professional Bicycle Mountain

Hyacinth Premium Professional Bicycle Mountain

It's suitable for a lot of bicycles. The brake cable are made of the highest standard zinc coated. Smooth movement and higher resistance to corrosive elements can be provided by it. PERFECT KIT It has everything you need: sheaths, end caps, and two different lengths of cables. It's long enough to fit for a tandem bike. If you want to make it easy to replace, make sure you use the shortest cable for your front brake and the longer cable for your back brake. You should use a Dremel tool to cut off the brake cable. The caps on the cables should be worn to prevent the cable end from being scratched. It is used by professionals. Most bikes can be fit for this. The amount of force from the brake line comes under slowing to a stop for a person about 250 lbs. After using them for more than 200 miles, there are no issues yet.

Brand: Hapleby

👤They are all the same wires with the same end. Why pay 10x more? The packaging was easy to read. The included ferrules were not what I needed, but my LBS was there for me on that. These are for replacing housing, which is not included. There is a New cables are great, but I should also lubricate them. Take some bike grease, lightly wipe the bare cable before installing, or with the housing slipped away if that works for you, and then go over it with a very thin-bodied lubricant--pro lube gold, in my case. The result is a cable that is a bit slippery and a bit protected from the elements. There is a When the years have passed and the bike is still riding, new cables are a great upgrade. I don't replace them just because it's been a year. The people probably don't buy aftermarket cables.

👤The corona crisis has made finding a bike impossible, my daughter had out grown her bike and we had to buy a used bike. The bike brakes needed a lot of force because of the damaged lines. I was worried that the generic brake lines wouldn't work, but they worked perfectly with her bike. There is a The price is fair for the number of cables you get and the end caps. I bought the Zoostliss cutter on Amazon for $9.99 and it worked perfectly, I would recommend buying a cable cutter if you want to cut cable evenly.

👤It was installed in less than a minute and fixed my problem, but it wouldn't have worked on my mini. Not enough length for a crimp. Hopefully it doesn't break.

👤It's a great value for brake cables. But 10 of them? I was hoping that half would be shift cables. Oh well. The new brake cable was threaded through the existing sleeves and tubes on my bike. After excess was trimmed off the cap on the cable needed to be Crimped.

👤The brake cables on my bike snapped. I have no experience fixing bikes. I like to fix things myself. It was simple and a great learning experience. It was worth a try since the cables cost 75 cents each. The replacement was easy, and I thought it was straightforward to slide the cable through the housing and pull it through the pinch bolt. So everything is snug, tighten the pinch bolt, and trim and crimp the end of the cable. It doesn't get much easier than that to get it to feel right.

👤I've used these cables on hybrid bikes and they work well. Unless you're setting up a high end rig, you don't need to spend more. The description says they are for road bikes, but they are not for road bike style drop bar brakes.

👤These cabels are a great value for the price. This deal is a lifesaver if you have a few bikes that need new cables and parts. Hopefully the cables will save your life in an emergency. It's much cheaper than at the bike shop, but it's decent quality. I was able to order some bar tape in addition to the cables because of the savings.

3. Housing Bicycle Plastic Mountain Cycling

Housing Bicycle Plastic Mountain Cycling

The Black OPS brand stands for quality and dependability. The bicycle brake line set comes with 1 piece 5mm brake line 2.5 m, 1 piece general front brake internal line 1.1 m, 1 x general rear brake internal line 1.7 m, 6 x brake line cap, and 2 pieces inside. The bicycle brake line set can help you hold the brake well, it has a strong cable for more braking power and smooth operation. The V bicycle brake noodles cable set includes two pieces of aluminum alloy V bike brake noodle cable guide pipe and two plastic hoses that are made of rubber tube with a plastic pipe. The bicycle riding set is made of quality material, each replacement part has been well made, reliable and durable, can be applied for a long time. The bicycle brake cable housing kit is a great accessory for bike repair and gift giving, and it is suitable for both mountain bikes and road bikes. The bicycle brake cable housing kit is a great accessory for bike repair and gift giving, and it is suitable for both mountain bikes and road bikes.

Brand: Patelai

👤The cables and housing are good. Make sure you pay attention to the lengths. The sorter is for the front and rear. There was nothing in the packaging to remind you of that. I wouldn't kill them to put a small piece of paper in the packaging to remind the user that there are two different lengths of cable.

👤I am really happy with this purchase. I thought I'd give it a try and see what I could do to fix the broken front brake cable on my youngest's bike. I was surprised by how easy it was to cut a new cable and repair it. The kit had everything I needed, the process was easy, and now the front brake works for the first time in years.

👤Excellent quality brake cables. I thought they were plastic coated, but they're not, they're really well made. The accessories are good. metal end caps would have made them better, but plastic ones seem to work well enough. I cut them with a wire cutter.

👤The package didn't have instructions.

👤I replaced the stock zero-rise handlebar with a 100mm riser bar for a more upright riding posture and left the original cables short of optimal length. There was enough in the kit to make up two new brake cable assembly, and I could have used it to make a larger bike. Products were easy to use.

👤The cables worked well. I replaced the straight handle bars with a set of rise handle bars and needed a longer brake cable. The parts were included and it was easy to install.

👤The kit was able to replace the front brake cable on my mom's bike. It was easy to install and cheaper than taking it in.

👤It may be a great product, but I don't like it to be cut for the length. There is pain in the a$$.

👤I haven't done bike repairs in 40 years. My advice for beginners is to take photos of the old set up before dismantling and use the old kit as templates. Great kit, other than that.

👤This was bought to replace worn cables. Extra bits, end caps, and all the other things were included. It's perfect for the job and easy to set up.

👤The pack seems to have good quality and a good price. The package did not contain the noodles advertised.

👤The materials did the job well.

4. IceToolz Fourth Hand Cable Puller

IceToolz Fourth Hand Cable Puller

The package weight is 1.5 lbs. The function is to pull extended inner wire so you can work more effectively. The ERGONOMIC DESIGN allows for both hands to be free. Keep the brake lines tight. It's designed for adjusting brakes, gears, and derailleur cables. The tool is made from steel with rubber handles and is made with quality materials. It is easy to adjust tension with one hand.

Brand: Icetoolz

👤I don't like this tool. It's difficult to line the cable up in the Jaws because they're very narrow, and it's difficult to keep the brakes on when you're wrestling with one hand. If a twisting of the tool takes place, the pops off. The little flippy jaw was loose and it wasn't holding. I used a hammer to get the rivet snugger. A cheap version of a good tool? I don't have to use it often. Makes. Me. So. Angry! Going to get a better brand and smash this one. Maybe it will work with zip ties? Nah. I don't want it in my life. It makes me a bad person. I think it's the reason my girlfriend dumped me. Thanks for the ice tools. You ruined my life. I'm going to die alone. I'm going to buy a good tool right now so I can be buried with it.

👤Such a promise! I replaced two cables when this arrived, and it did a good job of pulling and keeping the cable taut. There is a Two out of five? I only replaced two cables. I had to try again with a fresh cable after it shredded it three times. It seems that the cables pull behind the small piece of furniture, so they shred. I bet this would be amazing if the tool was assembled with less gap or play between the swinging arm and the main body. There is a I don't recommend it as I'm not pleased with it.

👤I have a price limitation, but I am a Park tool groupie. The Park tool is three times more expensive than Ice toolz, but still has a few low ratings. I decided to give this tool a try because I have been impressed with IceToolz. You wouldn't expect much, but it is almost the same as the Parks tool. The mechanisms and grips are very strong. One person said it got rusty. I think it will rust if you leave it out in the water. I use the tool to deal with brake cables. It will be easier to get out of the way. If you think the park tool is too expensive, I wouldn't buy it.

👤This is the second tightener I've owned. The one I bought from Performance Bikes was easy to use. This one doesn't work very well. It was difficult to hold on to the zip ties. It takes a lot more to get the job done. I would have returned it for a better, more expensive version if I had continued to use it. I got what I paid for.

👤I used to fight the cables for proper tightness, but they would slip and not have the bolt tightened enough. I would redo my work to get proper cable tension. The 4th hand tool is a tensioning tool that holds the cable in place with a bit of tension while you tighten the bolt that holds the cable. There's a lever that locks in the tension so you can check your component before you tighten the bolt. The device has saved me time and headaches.

5. Muzata Stainless Temperature Treatment CR03

Muzata Stainless Temperature Treatment CR03

Made from heat treated steel and chrome plated. The cable cutter is made of hardened steel and is great to clean cut. The Muzata nwest version of the cable cutter has rounded, thicker jaws that are quenching of the forging edge of chromium vanadium steel for clean cable cuts. Use the Muzata cable cutter to cut your steel cables cleanly and efficiently. The handle of the wire rope cable cutter is comfortable to operate and it is a manageable size at 18. Which is much easier to work with. You need a hardened steel cutter to cut through steel cable. The rounded jaws of the Muzata cutter form to the cable, eliminating the small strands of the strand. This product is part of the Edgeless cable railing system, in which they have planned everything you need for a cable railing project. The kit includes: round posts (PS21), Handrails (HT20), cable railing kit (CB07 or CR37), and wire rope. The CR12 CR09 is optional, but you can download the user guide PDF for complete system information. If you are a beginner or unsure about how to do it, you can get a free design service. Click the golden button to reach them. Their experts are able to do all the planning, designing, and budget works for you. You can buy all the materials in 3 minutes. If you are a beginner or unsure about how to do it, you can get a free design service. Click the golden button to reach them. Their experts are able to do all the planning, designing, and budget works for you. You can buy all the materials in 3 minutes.

Brand: Muzata

👤I wanted a cheap wire rope cutter. I need clean, neat end cuts in wire rope as I'm feeding the stock back on itself into hourglass sleeves, and if there's a loose wire or the bundle is out of round, it's a nightmare getting the wire into it. There is a The Felco C9s are about $200 and the Knipex 95-71-445s are $300. I rolled the dice even though I paid for it. The Muzatas struggled with the wire rope. The cut was ragged and didn't go all the way through. The effort required was significant. I've cut a variety of cable with HK Porters and it's always been a happy experience. The jaws did not completely close, leaving a small hole in the wall that you could see through. As I cut a cable, I could see the jaws of the shear were not touching the end of the cable. I oiled up the blades and tightened the pivot bolt on the jaws after filing the handle stops. I filed 888-353-1299 This time the Muzatas cut all the way through, but still needed a lot of force to muscle through the wire rope. I don't think it's a lack of power on my end of the tool because I'm a carpenter by trade and I've used force on stubborn objects before. There are many fine compact models that you can slip into your back pocket if you're cutting up to 3/16" wire rope. The cutters become huge once you cross the line to 1/4", and the price is the same. I was able to cut through the wire rope with the HKs by untwisting the bundles and cutting a few of them at a time, but it's not pretty. The Muzatas can only be put on a hard surface with your body weight, and you'll need to push them down with your body weight to make it happen. If you're doing a large project with multiple ropes, I'd recommend the Tyler tool 24, which cuts up to 5/8" wire rope and would probably eat a quarter for breakfast. It's less than $100 if you shop around. There is a I did not say "cable" as "cable CAN", which is softer and easier to cut than multi- strand wire rope, and which is made of copper or aluminum strands. It's confusing when you're trying to figure out how thick a material a particular set of cutters will cut, because some manufacturers call wire rope "cable". A pair of cable cutter's advertised as 1/4", but a look at the specifications shows they will only cut electrical cable.

👤The product description said it would cut aircraft cable. Even though I have a strong grip, I can't cut 5/16 cable without a pipe. I don't want to have two sets of cutters that I will rarely use, but I think it's worth the hassle to return them. There is a If you are looking to cut 5/16 or larger then you should keep looking because the cutters seem well made and I don't have anything negative to say about them.

6. Glarks 121Pcs Stainless Aircraft Bicycle

Glarks 121Pcs Stainless Aircraft Bicycle

2 x 1.8m brake cables, 1 x 2.5m brake housing, 4 x cable end caps, 4 x S-buckles, 6 x housing ferrules, 6 x protection clips are included in the package. The set includes 120 bike brake cable end caps in 20 different colors, which are black, silver, green, blue and golden. You can get a 8 inch wire cutter for cutting up to 5/32” of steel wire. The bike cable end caps are made from superior aluminum alloy. It is not easy to fade and has good protective properties. It is easy to carry. The cable wire cutter is made of steel and has enough strength to cut it cleanly. You can use the cable cutter to cut your bike brake cable, which can be used for wires up to 5/32''. You will get a clean cut. Put the cable end caps on the end of the brake cable and crimp it. The bike brake cable caps are bright and colorful and are a great way to personalize your bike. They have cable end caps in six different colors for you to choose from. If you don't need so many, you can give them to your friends. The bike cable end caps are applied at the end of the brake wire core and the tail end of the shifting wire core to prevent a brake wire core split. They can be used for mountain bikes and road bikes.

Brand: Glarks

👤These pliers are a good starting point for a home mechanic, but there are better products out there. If you want something to last for a long time, I would get the park tool or pedros, but if you just need a set to get a job done occasionally or you are just getting started on your work, I would not.

👤The package is nice. I know that there are better cutters out there, and I suppose if I worked at a shop and used it daily, I would want the quality of a Park tool. For the home mechanic who only uses it a few times a month, you really can't beat the value. The box of cable ends is really nice quality and would cost the same as the whole package if purchased separately.

👤I only used this a few times, in the beginning it was cutting fine, now after the 3rd use after only cutting cable less than 10 times it frays them and leaves the cable end ruined.

👤The tool is easy to use. I only needed the ends of the cable, but the price was so cheap it was possible to buy the whole package.

👤The bike cables should be cut quickly and cleanly.

👤There is a nice end cap assortment.

👤I only use bicycle cables and they work well.

👤Matching bike colors can be achieved with a great choice of colors.

👤The grease was straight out of the packaging. It was the first cut. And it was shut down. Every cut got stuck after getting less clean. It was a total waste of time and money.

7. SHIMANO Derailleur Cable Silver 1 2 Mm

SHIMANO Derailleur Cable Silver 1 2 Mm

This bike cable set is for mountain bikes.

Brand: Shimano

👤The cable caps come in two packages of 50. The caps are called the "INNER CABLE END CAP FOR SHIFTING". " The site does not have dimensions or specifications. I measured the cap's diameter and it is 1.81mm. They are easy to fit for the cable. The cable is 1.5mm in diameter and in good condition. I tried the cable caps on the old bike that has the single digit ultimate brakes and levers. The cable is 1.6mm and the cap is loose before it is crimped. The difference between trade-size and actual size is not published by these products. Even with a cable that has issues, the clearance around the brake cable is still a lot. The caps are good for both types of cables.

👤These tubes are closed on one end and open on the other, with a small ring around the open end. You can buy cheaper end caps, but they work just as well on brake or shift cables. The opening of the aluminum is large enough that you don't have to force a cable in. They are long enough that you can crimp them in two places for added security. When you lose one, the cable end will break. I would make them available in a flip cap bottle for easier use in the shop. I put them in a bottle for easier use. Silver is classy and goes with everything. When I run low, I will order more.

👤These are the genuine parts. The cap on the cable should be the right size. If you drop it, the hides are small and run off. You can search for it with a package of 100. It isn't the end of the world if you can't find it. The end cap can fall off if you need to adjust the cable. It's easier to put a new one in than it is to put the old one back in place. A small wire brad nail and some patience can be done, but it is worth more than that and the second squeeze usually cracks the end cap. The third squeeze is over. It is recommended. The package is a little more expensive. The home repair person needs a near life time supply.

👤I used the larger end caps that are made for brake cables at the bike shop because they are what they were given. They are so large that they are kind of sloppy when you crimp them on. The crimp is better when you have the right size. I keep both the smaller and larger end caps because they are cheap. I don't think there is anything special about the end caps of Shimano compared to other brands, just make sure you have the right size for the application.

👤Most generic caps are inferior to genuine Shimano end caps. I stopped buying packets of cheapies a long time ago. Better caps have thicker walls and are more compatible with cable sizes. This helps to avoid crooked looking caps, diagonal cutters actually cutting into cables, or cables being mashed inside the caps. Good caps look the part with a nice lip around where the cable enters them. It's important to distinguish between the two cable sizes. I usually use cheap caps for the brake cables on my bikes, but always use the genuine Shimano caps for SHIFT cables. You can use a dedicated tool to nicely crimp the caps. The crimp part of the park. The thicker the Shimano, the better the result and you won't fall off. I don't bother. I usually use a pair of side cutters. Good product. I would rate them 5 stars but with a high cost.

8. Muzata Steel Cutter Spring Ferrules

Muzata Steel Cutter Spring Ferrules

If you are a beginner or unsure how to do it, please reach them by clicking on "by Muzata" below. Their experts can do all the planning, designing, and estimating for you. You can buy all the materials in 3 minutes. It's ideal for steel. This cable cutter can cut up to 5/32" cable. It is used in a lot of home and industrial projects. The wire rope and crimper are recommended to be used with the aircraft. The cable wire ferrules are included as a gift. The blade of the wire rope cutter has been hardened by high-frequency quenching and is sharp and durable. The steel wire cable can be used to make clean cuts. The safety lock is designed to prevent accidental opens and cuts. It is easy to use and carry. The product is a pre-designed cable railing system. Everything you need to build a cable railing project has been planned by them. If you want to read more about the product or the user guide, please scroll down. You can check out all their systems by clicking on "visit the Muzata Store" below the title. If you are a beginner or unsure how to do it, please reach them by clicking on "by Muzata" below. Their experts can do all the planning, designing, and estimating for you. You can buy all the materials in 3 minutes. If you are a beginner or unsure how to do it, please reach them by clicking on "by Muzata" below. Their experts can do all the planning, designing, and estimating for you. You can buy all the materials in 3 minutes.

Brand: Muzata

👤They should not be used to cut wire. The bits of housing are sheared along the cut surface. I cut myself with a piece of housing after poking my skin with it. You should be prepared to trim or grind off the ends of your wire housing.

👤I got mine in August. I used them a lot more than average person. I have been spending a couple of weeks now. The first dozen or so cuts were very thick. After the pivot bolt came loose, the jaws got gnarled up quickly. I tightened the lock nut but the pivot bolt kept working loose even after I sharpened them. The lock nut was removed. There is a The ergonomics are off. If you don't hold the handles from the end of the handle, they will pinch the palm of the cutting hand, which is hard if you don't hold them from the end of the handle.

👤The cutters worked well for a dozen cuts. The bolt needs to be tightened every 12 or so cuts. The "spring" popped off and I went missing. This tool is not for everyday use.

👤I'm a truck driver. Wanted something to cut the coca cola cable seals that were brought and tried this one, it worked great. Work wanted to sell me a pair for $25.00, but they couldn't keep it. This is a better value.

👤This cut my aircraft wire for my project. There are 3 big issues. The ends of the wire are torn apart because the blades aren't curved. It's difficult to get through the crimps and easy to get through the skin. The spring that spreads the jaws isn't attached to the cutters in any way and just sits there. After the third cut, mine fell out. I put it back in and it fell out. I gave up. This isn't a crimper and they don't claim it, so I don't deduct stars for it. I would expect a wire cutting tool to crimp as well. It doesn't. I returned it because I didn't think it was worth anything compared to my plain ol' cutter.

👤The main shipping supplier switched to heavier cable seals. One of our customers had a cutter like this and had no idea where it came from. I had been looking for it for a while. I had been cutting through the body of the seals with large bolt cutter. I accidentally ordered this one day. It's what I was looking for. Works well for larger cable seals. My hands were shaking in the video because I was trying to control the grip and not just force it and knock my phone over. It wasn't hard to do.

👤We're from a different manufacturer, so we bought these to replace another pair that looked the same. They worked well for a while, but soon would not cut anymore. The metal on the blade was showing signs of wear. I had to go back. Unfortunate. The price for my project was great.

9. Cal Hawk Tools CPLWC8 Cutter

Cal Hawk Tools CPLWC8 Cutter

If you are a beginner or unsure how to do it, please reach them by clicking on "by Muzata" below. Their experts can do all the planning, designing, and estimating for you. You can buy all the materials in 3 minutes. package dimensions are: 2.032 cm L x 8.89 cm W x 24.892 cm H The country of origin is China. The package weight is 1.5 lbs. The package weight is 1.5 lbs.

Brand: Cal Hawk Tools

👤I cringe at the prices for most cycling specific tools, but I'm the type of cyclist that will build a thousand dollar bike. Almost all of it is marked up high because cycling is still a niche sport. I found these in a suggested area by Amazon when I needed to replace my Park tool cutter. Their cutting ability is as advertised, even though they showed up a little scratched up. I absolutely recommend them. There is a There are thoughts. Most of you are buying these for thicker cables. I went out to the garage and cut some cables. I can confirm what they say. 2. The quality of the build is solid. 3. If you don't have large hands, you're going to struggle with getting your hand around them in the wide open stance. These are cheap for what you get. They are more than the price would suggest. Buy them. Cheers!

👤Works great, don't know why you'd spend more. There is only one question surrounding the warranty. Most hand tools purchased from brick and mortar stores come with a lifetime warranty. What happens when there are breaks? I use it to cut cable. It works well for this purpose. It cuts quickly and cleanly. There is a I think that most of these are made in the same factory and that the price is dictated by the brand name. 5 Stars: Works exactly as advertised, fit/finish are what you'd expect when purchasing this type of product, and it's a good value, 4 Stars: Works exactly as advertised, fit/finish are what you'd expect when purchasing this type of product. Product works great but differs from description, 2 stars, it's useless, and is generally a waste of money.

👤The cable was replaced on four family bikes with about 16 steel wire cuts, half 4mm, half 5mm cable, and maybe five cuts of cable shielding. There was a noticeable decrease in the quality of the cuts. I could see that the cutting edges got damaged and that the pinion probably degraded, but I didn't have a 5x loop magnifier. Don't know if these are made for electrical work, or if they are labeled for steel cables. The first dozen cuts will probably suffice if you are going to throw it for three to five bikes. I was not surprised by the price.

👤We didn't want to spend the money to buy the expensive cutter we wouldn't use again because we didn't want to do a cable railing project again. We decided to buy another one even though we found this pair on Amazon with good reviews, as the price was very reasonable and we could buy another one even if it became dull after 100 cuts. The one pair completed the job well. After 200 cuts, the wire is still very sharp. Highly recommend this item.

👤I used a wire cutter to rebuild my mountain bike. I made a number of cuts with it. It was not able to make a clean cut by the end of the day. The tool is too mild to hold an edge. If you need a tool that will last, look elsewhere.

10. Pedros 131839 Bicycle Cable Cutter

Pedros 131839 Bicycle Cable Cutter

If you are a beginner or unsure about how to do it, you can get a free design service. Click the golden button to reach them. Their experts are able to do all the planning, designing, and budget works for you. You can buy all the materials in 3 minutes. It was made from heat-treated tool steel. The design of the grip is comfortable and easy to use. It is possible to quickly and cleanly cut brake and derailleur cables. The package has a dimensions of 2.311 L x 25.908 H x 9.398 W. The package has a dimensions of 2.311 L x 25.908 H x 9.398 W.

Brand: Pedro's

👤I need a cable cutter because I'm in the process of upgrading several bikes and I don't own a cable cutter. This tool does a great job on cable and housing. Sometimes a section of the coiled metal case will have to be moved by an awl when cutting housing, because it's the luck of the draw. This doesn't happen often and it's not a big deal. I could have cut it and tried again. This is an indispensable tool and I'm happy I bought it.

👤I've wanted to buy some cable cutting equipment. My dad's electrician tools were not cutting it. I found them to be affordable and reliable. They were able to cut housing and wires cleanly. Quality andDurability are good. They tend to rust in moist environments, so keep them in a cool place. Lubricate the spring and other moving parts to shorten tool life. It is clean but with a splitting cut for shift housings. Again, it can be filed down. The cut for wires is very clean. An end cap protects the cable from unraveling. There is a Pedro should include a crimping tool in his tools. I think it would be a good idea to give up some metal to make it easier to make professional crimps on your cable ends. I only marked four stars because of that. This is a well built tool that can be used in your home or shop. I think this is a better option for the price than the Park Tool model.

👤This unit is very well-made. It cuts through the inner cable. I didn't buy a bicycle cable cutter because the tools I had on hand were doing a good job. I had an occasional issue with some housings, but nothing that a second cut didn't cure, and maybe opening it back up with a scratch awl. I didn't think I needed to spend money on a dedicated tool. There is a I had to buy the tool after I held it in my hand. This is a high-quality tool. The locking mechanism and return spring are very slick. It is easy to use with one hand, and the other can hold the cable. The spring is designed so that it can't pinch your hand or catch your clothing, which is why it's a one-handed operation. The blades are sharp and don't chip or dull. There aren't many issues with cable housing collapsing. Sometimes the tool has a deep notch so that you can nip the curlie-cue off easily and get a nice flat & smooth terminal end to the housing that you want. The yellow grip on the handle is soft butdurable, so it is comfortable to use, and doesn't get in the way of your fingers or palm. This cutter has a high-end feel to it, like a tool from Klein or Ideal. I would recommend this tool to anyone who wants to work on their own bikes. It will last a lifetime if you keep it dry and safe. There is a This is a great tool. Pedro's or Park tools are the best. This is the best cable tool I've seen.

11. Lucas Shops Front Brake Bicycle

Lucas Shops Front Brake Bicycle

The Universal Cable End Pressure Line is used for the end of the Brake Wire Core and the end of the Speed Change Wire Core. It can prevent the core of the wire from unraveling after cutting. High strength is not easy to break. The front and rear brake lines are different lengths. The brake pipe line length is 61 inches. The package includes a pair of Brake Cable.

Brand: Lucas Shops

👤I have never installed a brake before. I got it right the first time I watched a video. I replaced some of the old brake housing with new ones. The brakes were easy and the gears were a bit harder to get right.

👤The cables are pre-sleeved which makes them easier to install than other brands.

👤The rear brake wire on my wife's bike was replaced. Simple install and adjustment.

👤These were easy to cut. I enlarged the pinched housing using a sharp metal pick after cutting these with a pair of wire cutters. The package does not come with small crimp caps for the ends of the wire, but it does come with a set of ferrules for the ends of the housing. I would not give 5 stars.

👤It worked well for my temporary rim brakes. These cables worked for me when I was looking for a beach cruiser.

👤It took about 20 minutes to install. It was a good value and was delivered on time. These cables were better than the stock ones. I discarded the bushing that sits on the base of the brake because I didn't need it. I needed to replace the back and front brakes. The cable tips were welded.

👤The anchor end of the cables is too large for the hand brake. I was able to correct the problem by using a file. I wouldn't buy this brand again.

👤It works like a charm. Price was correct. It arrived as promised.

Summary

What is the best product for bicycle brake cable cutter?

Bicycle brake cable cutter products from Hzjd Bike Tool. In this article about bicycle brake cable cutter you can see why people choose the product. Hapleby and Patelai are also good brands to look for when you are finding bicycle brake cable cutter.

What are the best brands for bicycle brake cable cutter?

Hzjd Bike Tool, Hapleby and Patelai are some of the best brands that chosen by people for bicycle brake cable cutter. Find the detail in this article. Icetoolz, Muzata and Glarks are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com