Black, Silver, Golden, and Copper Brown are available. There is a loud ring. The fitting videos on the Trigger Bell website can help you get the loudest ring. The Trigger Bell can be louder than a traditional bell. You can ring up to 5 times per second. The brass bell has a warmer and clearer tone than the cheaper aluminum bells. All bikes are compatible. Trigger Bell is pinged with your thumb, not your finger. On the right hand side, there is a mount for the Trigger Shifters. The grip is mounted between the brake and shifters. Questions? They would be happy to help. They will send the exact fitting instructions and video you need if you email them a photo of your handlebars. It's safe. Trigger Bell is a patented and registered design that allows you to ring it while turning and changing gear. You can ring up to 6 metres sooner if you travel at 10 miles per hour. 5 year warranty Trigger Bell is manufactured in the UK and has a money back guarantee.
👤It was installed on my bicycle drop bars. The strap going over the hood doesn't bother me. The sound was great when I installed it, but now it only makes a link sound. I might have put something on the bell dome because my thumb rests on it when I ride. To hear the link, play the video. There are a couple of good suggestions in the comment section of this posting. I was able to hear the ringing sound again. I have replaced my video with a different one.
👤It's ok, but not super loud. It's perfect for riding in parks. It scratched the rubber when I tried to put it on the hood. I put a piece of tape under it because I didn't do anything major. There is a The mounting side of the bell body is designed for narrower handlebars. I figured out that I should lower it so that it sits below the hood. I was going to mount it on the main rubber body. There is a The plastic strap may interfere with the brakes if it is in that position. I was very happy that the bell was easy to access from the hoods and when in the drops, and that it was very secure. I was wondering why my front brake wasn't working well. You have to be careful not to tighten the bell strap too much. You have to find a balance between being loose and not interfering with the brake. This is not an issue when you mount a road bike to a hood. It may not be a problem for other systems. I wish there was a link to an installation video on the package. It would have taken some time to mount and ring it. It's not difficult, but it is a bit quirky. I didn't expect that from a simple accessory. There is a It is a great idea to have a bell, but it is not the loudest or cheapest. If you want a bell on the hood, this is your only choice. It may be worth dealing with the installation quirks.
👤I wanted a bell on my road bike for added safety when I encounter other cyclists and pedestrians. I was trying to avoid bells that looked like sore eye spots on my rig after reviewing many products. When you have an event or special occasion to attend, you should try to avoid a blemish. You would hope to hide it. I was getting discouraged with many of the bells I came across because they were standing out too much and forcing my hands off my hood in order to start. This can be a danger. Do you take your hands off the steering wheel while driving? Not really. You can keep your hand on the steering wheel while flipping your turn signal with your finger. It doesn't sound like a big deal, but it's one less distraction you have to deal with. I was about to make a reluctant bell purchase when I saw this bicycle bell. If you are looking for a bell that is loud enough, discreet, and works on different bar types, then this bell is for you. There is a There are props to the creators of this product. Someone thought this out with the details in mind. I have them installed on both my bikes and bought three others for other riders. They love them because they serve the same purpose they were looking for.
The bike streamers are great for decorating children's bikes, they will fly and dance in the wind. The bicycle bell has anti-rust and anti-aging effects. A loud ringing tone can be provided to help you ride safely. Bells can be used for standard mountain bikes, children's mini bikes or vintage bikes. The bike bell is easy to install and can be done with a screwdriver. The bicycle bell is included.
👤I thought the bell was upside down when it arrived, but I can change it to face I want. The bell sounds nice and it's easy to install.
👤I am very disappointed. This was a nicer item. I don't expect a sticker. It had scratches on it. I am going to pull out my craft box and see what I can do to make it nicer because my daughters birthday is too soon to send it back and find another.
👤The bell is difficult to ring for young children. Quality is not great. You get what you pay for. This made my niece happy.
👤It looks and sounds nice, but it comes apart easily. It's easy to put it back together, but it's a challenge to deal with. It was a little more difficult to attach to the bike because it has two screws instead of one. There were some minor complaints.
👤Put this on my bike to let other bikers know I'm there. I used this for one ride and it wouldn't work on my next ride. The lever on the side is stuck in place. I can't return this now so I'll have to buy another one.
👤Overall, good! It works well for the purpose, it is very light and only the top is plastic. Will see if it lasts. The top is made of aluminum.
👤It's too difficult for me to push down. It doesn't return on its own. It wasn't enough to be on the bike bar, so I had to reinforce it.
👤The bell doesn't ring right. You have to force it but it won't be used much because it doesn't have a flow.
A delicate decoration is a great birthday or festival gift for your kids, they will love it. The bike bells for boys are made of premium iron. Compared with plastic and aluminum ones, iron bicycle bells are much safer. Iron materials are durable for a long time. The bike bell is protected from getting rusty by the thick paint coating. There is a rubber padding added to the kids bike bell. It prevents the bell from falling off even if you are riding on a bumpy road, and it also avoids scratching your bike during installation. The left and right bicycle bells are easy to install with the screws and screwdriver. The classic bike bells for adults are ideal for bikes. It is a classic metal style and can remind you of happy childhood.
👤I was able to buy the combination of bells for our bikes. We didn't know which side of the handlebars the bells would be mounted on. I was going to buy smaller bells to fit all the other mounting hardware on our handlebars, but this bell is painted, solid metal and has no weak plastic. The sound of the traditional bells is pleasant and clear. The chime was activated by thumbs.
👤I have been looking for a classic bicycle bell in black for a long time. These work well. I bought the pair because I didn't know which side to put on because of the brakes, the horn and the shift lever. I used them both, I liked them so much. The classic sound brings back childhood memories.
👤I need it to be quiet because I ride on the Hollywood beach broadwalk in South Florida and there are always people walking on the bike path. The bell keeps slipping even when I tighten it down. I will probably buy a different bell for now.
👤The ring tone is great. The piece of rubber that held it in place on the handlebars wasn't long enough. You get two for the price of one.
👤Universal standard handlebars will only be compatible with this. It will not fit larger diameter handlebars according to the description.
👤The bell was not what I expected. It is basic to be fair. It works as such. Don't expect it to be anything more than that when you buy it.
👤It makes a good sound. It was not easy as the description said. I gave up after 40 minutes of trying. Someone will install it for me. Do not install alone. The rubber band broke.
Bike Mirrors come with a protective film, please remove it before use. If you have a quality problem, please contact them. The bike bell can be installed on the right or left side. The bike bell is 3.5 cm in size and has an exquisite outlook. The protective pad is needed to prevent sliding down. Premium high brass is anti-rust and anti-aging. It is durable due to its retro design and strong springs. It was a nice loud tone. The bike bell always has a loud tone. The riding is much safer because pedestrians and passing vehicles can hear you. 30-days money back and 12 months warranty are included in the warranty.
👤Why didn't I buy this before? My beloved Mountain Bike was rebuilt into an urban cruiser. I have never been satisfied with the bell I bought. There is a My wife found this one for me. I love it! There is a It is loud and a good trait. It is a tank. When you hit a pot hole, there is no accidental ring. It's easy to ring when you need it. There is a The quality of the ring is what sets this bell apart. It has class. There is a The look is different. It is built of heavy, quality metals. I have used my bike a lot during this time. This has been a great addition to my vehicle. Don't make a mistake. Buy this product first. There is a This review has been helpful. I will be happy to answer any questions you have.
👤I thought it would be a great bell. It has a beautiful ding, but nobody knows what it means. They don't know where the single "ding" comes from and they don't identify the bell as a bicycle bell, so I try to use it to warn people. People don't seem to get "ding-ding-ding" when I try it. I'm afraid that people are so conditioned to the sound of a bicycle bell that they don't realize that it's an exception. I am going to have to order a more traditional-sounding bicycle bell because it doesn't warn people.
👤The bell has a loud ring. It's perfect for two lane trails shared by bicyclists, pedestrians, runners, families and strollers. The bell is very effective at warning people that a cyclist is approaching, and they immediately move or stay in their lane so the cyclist can pass them on their left. There is a The lever on the clapper needs to be snapped at the bell. This can cause irritation to the bellringer's thumb. The reason for only 4 stars is the same as the reason for 5. There is a The bell must ring in order for the clapper to snap. I would suggest covering the thumb with gloves in the winter, and then practicing a technique whereby the thumbnail does most of the interaction with the spring mechanism. One could wear a protective covering on the thumb. The user will have to make a decision. This bell is very loud and distinctive and is worth the hassle of learning the "thumbnail technique." My initial review has been updated. I would buy this bell again. Please note. I would like to share the modification I added. The metalic ringer mechanism was attached to a strip of tough polyester fabric. The fabric protects the thumb from being hurt when ringing the bell. I think a small strip of soft leather would work just as well and be even more durable. I can raise my rating from 4 to 5 stars with this easy improvement.
👤The rubber inserts provided fit snug on my handlebars. If you press the lever back too far, it won't hit the bell and nothing will happen, but just press harder! For a simple device, the sound is loud.
5 year warranty Trigger Bell is manufactured in the UK and has a money back guarantee. Mirrycle Incredibell Brass Duet Bicycle bell has a brass dome. Most handlebars have a 25.4 meter clamp. It has a lever. It fits handlebars with a measurement of 21.7 milli meter. The diameter of the dome is 33 million meters.
👤I don't know how to rate this bell because you can get different bell from different seller. I have bought this bell 4 times. Not the same every time, just different. I bought it from different sellers. Several years ago, I and my husband received the first two bells. We have been using the bells for several years and have no problems. I ordered two more because we wanted bells for kids. There are two colors, one purple and one black. The purple came from China and the black from Thailand. I expected the same quality as before, but got fake ones. The purple was cheaply made. My eyes were close to falling out of my head. You don't want it. Completely different, bigger, cheap plastic broke. I put it in the trash and should have taken a picture. If you have original bell, you can see that the black one is not original, but slightly different. There is a different sound as well. I admit, it was better quality than fake purple, but it was broken. I tried to fix it but it fell off. Both sellers agreed to refunds. There is a It's difficult to rate this bell because you get different bell from different seller. I rate them 5 stars. I got a black one from Thailand and it was good. China has 0 stars. I rate it 4 stars. 5 stars for the original bell, minus one star because of fake bells. The original bell should not be used to list items that are different. I added pictures of the blue bell original, black and silver original, and whole black. This is broken and not incredibell. I trashed the fake purple bell so I don't have any pictures of it. I ordered purple again from Amazon and it was original. Excellent quality and sound. I will try to add a picture when possible. The purple bell has "Japan" on both sides when I took the pictures. The old bells have Japan on one side. Enjoy your day and your bell.
👤I tried to mount it on the right side of my handle bars, but I realized pulling down on the spring loaded ringer lever was not easy. I thought it was for left handers. I moved it to the left side. It's more natural for me to flick it on my left thump. A flicking UP motion instead of a Pulling DOWN motion. Time will tell if plastic is cheap or not. I might be weird or picky, but others will find it fine on the right side. It was a no-go on the right for me. I have added an edit. I put a photo of my left hand on the lever, ready to push it up to start the ringer.
👤I decided to buy a new bell for my bike after doing a lot of research. Money is not an object. I wanted a bell. The bring-bring style bells I had were old. I rang the phone out of it. It was made of cheap plastic. When I got it, I knew it was going to break. The store had only one thing that I needed. I had a single ding with a thumb hammer. They are small and well made. They are perfect for making someone say "Oh, what a pleasant ring sound." Let me turn around and see what makes that sound so pleasant. "Get the heck out of my way" is not the effect you want. No more, single-ding. There is a The Mirrycle Incredibell Brass Duet is a different type of ring. It has a lot of ding-din'ng. Two rings are not a doorbell. It makes a decent amount of noise when you ring it fast, so you can tell people to get off the trail. You can let them know you're on their left by doing a gentle "ding". There are counterfeit versions of this. It's probably best to buy it from Amazon. If it costs $2.000, you'll know if it's fake, but if it costs more, it sounds like a dud.
Easy, SCRATCH-free installation for all handgun accessories. The installation requires a single key. The mounting strap can fit from 22.2mm to 31.8mm. It fits mountain bikes, road bikes, kid's bikes, and e- bikes. The mount is dipped in vinyl to protect it from being scratched. It's a nice loud tone. The retro design of the Brass Bike Bell can bring a clear, sweet and loud tone. Pedestrians and passing vehicles can hear your song. High quality. The bicycle bell is made of brass with no plastic parts, anti-rust and anti-aging, and high strength springs and light strong alloy brackets make it durable. It is easy to install on the right or left side of the handlebars, you just need to tighten the screws and fix the base of the bell. It's very convenient and saves time. For a bike type. It's for handlebars with a diameter of 22.2mm. The protective pad is needed to prevent sliding down. It's practical. One of the necessary bicycle accessories for you to ride is the bell, which can decorate your bicycle, but also provide safety warnings during the journey.
👤The Crane Suza bike bell was unavailable at the time I bought this. This bell is not close to the original and I hate to have to do this. Wait until the Crane bell from Japan is available. The tone is poor when you try to ring it, because the lever shifts around when you try. This bell is not even close to being nicer. They gave me a refund after reading my review. The Crane bell I ordered in 2013 is being delivered today. Thank you for the update. The Zukka bell was removed and the Crane installed, but I was surprised to find the bell crown post was loose. I twisted it tighter. The bell tone improved because it kept the lever strike from shifting. If $ is an issue, this bell would be an acceptable substitute for the Crane bell.
👤The bell is great. I almost bought the more expensive one from Japan. I read some bad reviews. It was easy and fast to install on my E-scooter. Don't tighten the wrench as it affects the tone of the bell.
👤The quality, sound, and look of the bell are second to none, as well as coming with a decent price tag, is what I will mention first. I took off two stars because an Allen wrench was required for assembly. They didn't give one with the bell. There is a If I needed to, I wouldn't reorder. I would look for one that did not require special tools. There is a Most items requiring'special' tools include them with the product, as they cost pennies for these companies to'stamp out' (mass produce) and provide. I would rather give my business to a company that is more attentive to these details. Great!
👤I wanted to try on bikes. I don't want to spend the kind of money888-607-888-607-888-607-888-607-3166 that it would cost for888-607-888-607-888-607-3166 for888-607-3166 for 3 of the expensive name brand bells. It would be great to have one bell that would be easy to transfer between bikes. The bell had a rubber shim and a clamp. The diameter of the bars on my road bikes was much larger than the bell. The bell fit perfectly on the mountain bike handler. The bell on the mountain bike looks good, it stays in place, and it makes a piercing sound when it's time to go to work.
👤I was looking for a bell that would alert pedestrians of my approach. Those with earbuds can hear it. I don't have to shout "pass on your left" when I approach a walker or another bike.
👤The bike bell has some pads on it to keep it from sliding down on the handle bar. The bell should be positioned so that it is easy to reach. A nice, loud, solid ring gets the attention of someone nearby. This bike bell is good.
👤The bell stretched to use it. That wasn't the bell. I don't think I'll have that problem. The bell is made of metal. It is easy to install if you have an allen wrench. Lefty loosy, I'm right. The bell won't ring if it's rotation is far one way or the other. Correct placement is good. It's not very easy to steal but if they had an allen wrench it would be.
A pink bike bell and a 3D Unicorn pattern sticker. An outstanding craft and an anti-rust coating. The copper alloy bike bell is made of high quality copper alloy with anti-rust and anti-aging coating, which offers a long- lasting use. Their bike bell is small and beautiful. A loud sound is coming from a hard hammer. The sound of the Classic Bike Bell is clear and sweet. Pedestrians and passing vehicles can clearly hear your song. Style is eternal. The retro design of the bicycle bell makes people feel like they are in the old days. The small shape will make you love it. Easy installation. Their bell is made of copper and can fit on handlebars from 22.2mm to 22.8mm. They will send a hexagonal wrench to you for your fast and easy installation on the right or left. If there is a problem with the product, please contact them.
👤I wanted to like the bell. I searched for a bell that didn't cost a lot and it looked ok. I saw the reviews and thought that was the case. It! It is small and seems well made with metal components and has a pleasant sound. But... I don't know what the bell is designed to fit. Went to try it on the road bike drop handlebars and the plastic holder was so small that it pressed the bell hard. The handlebar is too big. I took the bell from my bike handlebars because I liked it so much. The holder became rounded so that the clapper couldn't make contact with the bell. The handlebar is too small. After trying it on several handlebars, I found no bikes that were just right. I tried to make it fit, but it wasn't designed to fit adult handlebars. Returned and looked again.
👤I have several bells on various bikes, but this one is really nicely made, with a plastic strap that wraps around your handlebars, but won't scratch it. There is a The small bell makes a loud, piercing sound when it's released. It's easy to install, you just have to make sure the captive nut is lined up. I dropped my bell, and the nut moved sideways, and didn't want to line up with the screw until I pushed it back into place with a small screwdriver. There is a The bell's strikers are mounted 90 degrees from the bell. When you pull it back, a spring pops against the side of the bell. The bell won't make a sound if the clamp is tightened too far. The diameter of the handlebars on one of my bikes is slightly smaller where the bell mounts and at first, the bell wouldn't ring, although there didn't seem to be anything wrong with the bell itself. I cut a piece from an old inner tube and put it under the bell's clamp to resolve the problem. The bell works properly if there is just enough extra diameter. I've got two of these bells on two different bikes, and for now, this is my favorite design, so I'll continue to buy this brand for the rest of my bikes.
👤I initially thought this bell was very good. It was a good bell. A pleasant tone, clear and easy to hear. After 8 weeks of use, it no longer rings. When you flick the thumb lever, the spring that returns the strikers against the bell dome has weakened so much that it no longer reaches the bell. Silence. There was no noise. The bell is just a decoration. It was useless. No more dinging for 8 weeks.
👤Don't let the small bell fool you because it is loud. There is a The bell has a design flaw. The opening clip around the bar needs to be the same diameter as the handle bars. There is a screw to hold the bell in place. There is a In my third and fourth pictures, I show you what happens if the diameter is bigger, you end up with 2 points of contact that completely ruin the sound of the bell. The spring on thetrigger is the origin of one contact. In my last picture, you can see both of them making contact.
We stand behind the quality of their products and if you have a problem with them, they are happy to replace orRefund your item. E-NE MATTE BLACK BELL: The Crane E-ne is a small bell that can be placed on top of the handlebars or in front of the bar for a more aerodynamic profile. The bars are 22.2-31.8mm. The MATTE black model has a dome made of aluminum. A dome-shaped bell is a beautiful sound and a pleasant ring. The ring of a brass bell is more durable. Crane Bell knows the ring should be pleasant, but it should also be safe and loud. Premium Japanese phone. Crane Bell Co. is a Japanese company. Quality was not compromised on any part of the bell. The bicycle bells are unique and for bikers who care about the little things. The mount and springs are resistant to Rust. There are no plastic parts. It can be positioned in front of the bars or on top of them for a more aerodynamic look. You can fit other accessories if you take up very little real estate. The bicycle bell looks like it's from home on stylish city bikes, carbon fiber road bikes, and mountain bikes. The bike horn is larger than the smaller one. Easy, SCRATCH-free installation for all handgun accessories. The installation requires a single key. The mounting strap can fit from 22.2mm to 31.8mm. It fits mountain bikes, road bikes, kid's bikes, and e- bikes. The mount is dipped in vinyl to protect it from being scratched.
👤I put a lot of research into it since bicycle bells seem to have become popular recently. I decided on the Crane based on the positive reviews I found on the forums. The bell is of high quality. It is small enough to not look out of place on a road bike. It looks good. It is very loud. There is a A loud noise! It is even louder if you pull the lever all the way back. My wife covered her ears when I opened the box. There is a The little bell makes me excited to ride and it makes me smile.
👤This one is a winner after I returned other bells because they didn't fit on my handlebars. It fits perfectly, it sounds great, and it's really good looking. I am very happy. The price is correct.
👤The bell is outstanding. They are from Japan. I have seen that this version is a rip off of the Spurcycle bell. This is ridiculous. The tradition of Japanese craftsmanship that has paid homage to cycling for several decades now includes Crane. The crane was once the highest end of the derailleur. I installed a Spurcycle bell the same day I installed this model. Both are nice. The Crane is more likely to be heard by elderly people according to an acoustic engineer who tested the frequencies of both. Different frequencies. I can not claim to be competent in this area. The Spurcycle is elegant and both sound great. The Crane sounds better to me. It reminds me of a priest's gong. Is it possible that I'm being pre-mature? Probably. I am keeping both. Don't be deterred from buying a Crane bell from a reliable merchant. They are wonderful.
👤There are pros and cons. This bell is pretty nice. It looks good and should last. I had a bell from Spurcycle that cost $60 and it was a much better value. The bell is loud enough to alert hikers on the trails that I ride. There were no issues with mounting it to my bars. There are some things that are CONS: The bell requires a strong flick of the lever to ring it, because the hammer is too far away from the surface of the bell. The bell is quiet when riding. The bell is mounted via a metal band that is tightened with a key. I lost my Spurcycle bell after a crash and I worry about the same thing happening here. It would be great if there was a way to add a zip tie method to the mounting method.
👤I really wanted the Spurcycle. I couldn't drop $50 on a bell. This is a good bell. It is a copy of something else. I think it's done well. I had it in my hand for a few days before I could install it. The mount is easy to use. The strikers are easy to manipulate. I've read reviews that say it doesn't always ring. I think that's an operator error. The Suzu is the only Crane bell I have. I liked the tone of that bell. It was so large. The size of the E-ne is perfect for a road bike. I looked at the bell. The bell is so quiet that I am glad I did not get that one. I saw one yesterday. It is very quiet and low profile. It would be great for riding in a library. If you can't justify dropping the money for a spurcycle, get this bell.
Universal Fit is the type of fit. The bell is easy to mount to the handlebars. It's great for all Firmstrong men's, women's, and kid's cruiser bikes. Ring the bell to let people know you are near. The frame of your bike can be colored or mix-and-matched. Some assembly is required.
👤The bell came as pink as the photo. The thumb mechanism lets you enjoy the scenery without looking down while you warn oncoming people that you are riding illegally on the sidewalk. They flip you off with a flick of a thumb, but you carry on unaffected because that beautiful chime calms your nerves. It looks like the bells of Heaven. Sometimes my wife will ring it when there is no one around. When she is angry at me, I suggest she go to the garage and ring that pink bell. Her face is less blue and her fist is unclenched. This product is very good.
👤If you get the light blue it's about 5 bucks cheaper. Zip tied it to my Pride Traveler pro mobility Scooters. Zip one side of the clamp, then zip the other side. When I'm creeping up slowly on people, I'm pretty slow to ring it. People freak out when they hear a bike is going down on them. They were wondering which way to jump to get their loved one out of the way. I was 10 feet behind. I was scared of 3 of the 4 people. It will take 10 minutes to pass them, but I'm going with 30 ft of clearance.
👤I bought two for the kids. Two children have a trike and a scooter. The bell was able to attach to both, but we had to mount it sideways on the vertical bar because of the handlebar grips, and it still works great. The bell is heavy and well made and should last forever. There is a bicycle bell ring. I was worried that the two year old wouldn't be able to hear it. It makes the ring easily. She had no difficulty. It's a nice bell that's loud enough to alert someone of your presence and also to delight a child ringing it for the joy of it. It is easy to mount, just use aPhillips-head screwdriver. If you want to attach it to a different bike, it's easy to remove. The way it is made will allow for slight differences in the thickness of handlebars. It would be perfect for an adult bike.
👤I love my bell. All metal construction on the bell. The thumb lever is black. It's a good way to let others know you're there. It matches my Huffy Lusso cruiser perfectly.
👤I love the bell. It is the exact sound I wanted to make when I am coming up behind people on the bike trail. I wish the bell would fit the traditional hybrid bike handle width, and that it had a padding that doesn't scratch the bike, but it doesn't. I went to the hardware store for a longer screw, but ended up using part of an old tube to keep the metal from scratching my handlebars. Everything was fixed by this.
👤So... It is a quality bell. I don't ring or shake when I ride. It sounds like a school bell. I can ring it a bit if you only want to. I don't have to push the level all the way, which is nice if you just want to know that you're okay. I wanted it to be smaller. I would like it to be smaller but it is the same quality. This is the size of a bike bell. It was easy to put on and quality was good.
There is a warranty. They will give you a 30-day money back guarantee, 100% replacement or refund. The bicycle bell is well built and affordable. The weight of the dome is 40g. It's easy to install, it fits for the handlebars of the bicycles. The bike bell is made from aluminum. For bike type, it fits for any standard straight bicycle or stunt scooter handle bar. The bicycle bell should be used on the right side.
👤These are easy to install, sound good, and are loud enough to be heard, but not obnoxiously loud, if a small child decides to ring them for 10 minutes while riding their bike. There is a I will replace it if it breaks because a bike gets dropped or someone knocks into a tree, they are inexpensive and I don't expect them to survive having a bike drop on them. I'm happy with them. I don't get compensation for my reviews, I like to give real world experience after I have used the product for a while, and not just after I open the box.
👤If you want your child to be a bike patrol police, then this bell is for you. It is fantastic quality. The ring says to get out of my way. It is a beautiful blue and it says "respect my authoritay".
👤The product was not up to my expectations. It is camping in a bag. It wasn't protected in shipping. It is cheap. The sound isn't good. I will not order this again. I don't recommend this bell. You will be disappointed.
👤I was looking for a bell that my wife could put on the wheelchair to let people know that they were in the way. I wanted a bell that didn't need batteries. The bell sounds nice.
👤No tools are required to install. I was worried that it would be awkward to ring the bell, but it is. I like the sound of the bell. The bell sound is normal. You can press it with less force to make it softer, which I do sometimes when passing walkers who aren't in the way.
👤Most of the components in the mechanism are made of soft plastic. The birthday gift for my daughter failed to function out of the box. It is being returned.
👤The lever is backwards and it makes a terrible, sick sounding noise that doesn't even resemble a bike bell. It is twice the size of all others. The color is the best part. I returned it. I would have liked it to work.
👤I'm not sure if it's the design after it's attached to the handlebars or if it was something that happened to it, but the bell stopped ringing and the only sound it made was the ringer dragging against the metal. Sometimes I could find a spot where it would ring a little, but that never happened. I need to open it and see if I can fix it.
A new kind of ring cuts through traffic noise and adds long, clear tones. A new kind of ring cuts through traffic noise and adds long, clear tones. The 7075 aircraft-grade aluminum ringer and a strong, high-tensile STAINLESS-steel spring are premium materials. There's no need to slide it on, it opens over the handlebars, and it tightens with an Allen key. Cable management. The cable management system gathers your cables. Make sure you know where you want to place the bell to choose a large or small size.
👤I wanted to like this product. I like how it looks and the size. The performance is poor compared to a cheap bell. The video has all the information you need.
👤The large luxe version is loud and has a cutting tone. I love it! There is a The large luxe is the one to get. The small bell suffers from a design flaw that will cause it to bounce and cause it to drown in resonance according to professional reviews. The result is disappointing. There is a sound. The plastic strikers used in the classic bells don'tpeal as strongly as a metal strike, and are not as durable. Customer reviews on Amazon tend to align with pro reviewers, as the more unfavorable reviews tend to correspond to the classics. It's best to sick with a lot of stuff. There is a I have two other cheapo bells with plastic strikers. The Oi Luxe has a longer ring. There is a I watched the promo video before receiving my Oi. The video warns against driving the screw too far in the ring. The top of the ring needs space to work. The instructions only required the rubber strip for 23.8mm bars, so I used the plastic shim and the rubber strip, even though the instructions only required the rubber strip for 25.4mm bars. I will not be contained. The shirt is ripped off.
👤I have been with this bell for a week. I'm a casual road and mountain biker. My rides last about 6 hours. I have a bell on my mountain and road bikes. The design of the bell is great, but it is useless to me. The bell is inaudible to riders more than 8 feet away. I believe this is due to the bell being less powerful and the ring not being as loud when hit with the strikers. The suspension of the bell is very springy. The bell is making noise on a rough road. You have to keep your hand away from the bell because contact will make it disappear. The cable relief in the band is one of the reasons I bought the OI brand. If the cables come out of the tape on the front of the bar instead of the bottom of the bar, the bell strikers will be moved very far down on the bar. The bell cannot be adjusted due to the design, so I'm not going to try it on the mountain bike. There is a The bell can be forced into position where it is difficult to use if it is not careful where you touch it.
👤Does a bell make a sound if nobody hears it? I wanted to be a fan of this bell. At first glance, it appears to be well designed. The tone is pleasant. It's whisper-like volume is useless for warning other people. The bell would be attached to the library cart to warn other readers. A stronger spring is all it needs. I'm going to see if I can make it work. Purchase a Crane or Spurcycle and save money.
Bicycle bell crane products from Trigger Bell. In this article about bicycle bell crane you can see why people choose the product. Cristin Tang and Pacearth are also good brands to look for when you are finding bicycle bell crane.
Trigger Bell, Cristin Tang and Pacearth are some of the best brands that chosen by people for bicycle bell crane. Find the detail in this article. Greallthy, Mirrycle and Zukka are also brands that their products are worth to check.